Error Code 0B0002

Problem Description:

Bad IDS pressure read.

Corrective Action:

Try the following:

1. Check that the cable from the Ink Supply Station (ISS) PCA to the Ink Supply Station is correctly connected.

2. Check that the Air Pressurization System Sensor Cable is correctly connected and is NOT damaged.

3. Check all the tubes of the APS and make sure they are NOT pinched or damaged.

4. Faulty APS. Replace the APS.

5. If the error code continues, replace the Main PCA.


Only replace one component at a time and check if the error has gone before replacing another component. Using this procedure you will be able to determine exactly which component failed.

This entry was posted in Error Codes, HP DesignJet 5000. Bookmark the permalink.