Category Archives: HP DesignJet T770
Error Code 75.22:YZ
Problem Description: The spittoons (Left Spittoon, Service Station) are full. Corrective Action: Use Preventive Maintenance Kit #2 to replace the Left Spittoon and Service Station.
Error Code 75.21:YZ
Problem Description: The spittoons (Left Spittoon, Service Station) have reached 80% capacity. Corrective Action: Use Preventive Maintenance Kit #2 to replace the Left Spittoon and Service Station.
Error Code 74.1:YZ
Problem Description: Error uploading media profile update file Corrective Action: Try the following: 1. Switch the power off from the back of the printer and disconnect the power cord. Reconnect the power cord and power on the printer. 2. Make … Continue reading
Error Code 74:YZ
Problem Description: Error uploading firmware update file Corrective Action: Try the following: 1. Switch the power off from the back of the printer and disconnect the power cord. Reconnect the power cord and power on the printer. 2. Make sure … Continue reading
Error Code 72.02:YZ
Problem Description: A service calibration should be performed. Corrective Action: To find out which service calibration to perform, print the calibration status. At the front panel, select the Internal Prints icon, then Service information > Print calibration status. Perform whichever … Continue reading
Error Code 71:04
Problem Description: Out of memory. The total memory available in the printer depends on its configuration. It is reported as HP-GL/ 2 memory or PS/PDF memory. If the amount of memory that the printer needs to process the file is … Continue reading
Error Code 71:03
Problem Description: Out of memory Corrective Action: Restart the printer.
Error Code 68:YZ
Problem Description: Loss of engine counters tracking Corrective Action: The printer will continue to function correctly, but the life counters will not continue counting until you restart the printer.
Error Code 65:YZ
Problem Description: Memory Driver Internal I/O error, I/O Socket Manager Internal I/O error Corrective Action: Try the following: 1. Switch the power off from the back of the printer and disconnect the power cord. Reconnect the power cord and power … Continue reading
Error Code 64.1:YZ
Problem Description: Printer does not recognize the USB HDD accessory connected. Corrective Action: Try the following: 1. Switch the power off from the back of the printer. Connect the USB HDD accessory, check the USB cable is properly connected and … Continue reading