Error Code 0C0032 (Continuable)


Problem Description:

Drop Detector not calibrated or the calibration settings have been lost.

Corrective Action:

Try the following:

1. Perform the EEROM Backup from the HDD to the Main PCA (select Main PCA replaced).

2. Switch the printer Off and ON again.

3. If the System Error Code continues:

– Perform the Service Station Calibration.

– Replace the Drop Detector Assembly.

– Replace the Service Station Assembly.

Warning:

Only replace one component at a time and check if the error has gone before replacing another component. Using this procedure you will be able to determine exactly which component failed.

Comments are closed.