Author Archives: jgubow

Error Code 64:YZ

Posted on July 16, 2013 by jgubow

Problem Description: Input/Output problem through the USB Port Corrective Action: Try the following: 1. Switch the power off from the back of the printer and disconnect the power cord. Reconnect the power cord and power on the printer. 2. Check … Continue reading →

Posted in Error Codes, HP DesignJet T1200 | Comments Off on Error Code 64:YZ

Error Code 63:YZ

Posted on July 16, 2013 by jgubow

Problem Description: Input/Output problem through the network interface of the Formatter Corrective Action: Try the following: 1. Switch the power off from the back of the printer and disconnect the power cord. Reconnect the power cord and power on the … Continue reading →

Posted in Error Codes, HP DesignJet T1200 | Comments Off on Error Code 63:YZ

Error Code 61:08.1

Posted on July 16, 2013 by jgubow

Problem Description: The file cannot be printed because it is password-protected. Corrective Action: Resend the file without password protection.

Posted in Error Codes, HP DesignJet T1200 | Comments Off on Error Code 61:08.1

Error Code 61:04.1

Posted on July 16, 2013 by jgubow

Problem Description: The PostScript fonts seem to be missing. Corrective Action: Perform a firmware upgrade to re-install the fonts.

Posted in Error Codes, HP DesignJet T1200 | Comments Off on Error Code 61:04.1

Error Code 61:YZ

Posted on July 16, 2013 by jgubow

Problem Description: The file format is incorrect or not supported for the current printer configuration and the printer cannot process the job. Corrective Action: Try the following: 1. Check whether the printer supports the file format (formats such as PS, … Continue reading →

Posted in Error Codes, HP DesignJet T1200 | Comments Off on Error Code 61:YZ

Error Code 60.2:YZ

Posted on July 16, 2013 by jgubow

Problem Description: Initialization error Corrective Action: Contact HP.

Posted in Error Codes, HP DesignJet T1200 | Comments Off on Error Code 60.2:YZ

Error Code 60.1:YZ

Posted on July 16, 2013 by jgubow

Problem Description: Initialization error Corrective Action: Try the following: 1. Switch the power off from the back of the printer and disconnect the power cord. 2. Check that the printer is properly connected in all other respects. 3. Reconnect the … Continue reading →

Posted in Error Codes, HP DesignJet T1200 | Comments Off on Error Code 60.1:YZ

Error Code 59.2:00

Posted on July 16, 2013 by jgubow

Problem Description: An unsupported or reused part has been installed. Corrective Action: Install only new parts recommended by HP for this printer.

Posted in Error Codes, HP DesignJet T1200 | Comments Off on Error Code 59.2:00

Error Code 59.1:09

Posted on July 16, 2013 by jgubow

Problem Description: Two electrical parts have been replaced at the same time. Corrective Action: Replace one part at a time, and restart the printer before replacing another.

Posted in Error Codes, HP DesignJet T1200 | Comments Off on Error Code 59.1:09

Error Code 56:YZ

Posted on July 16, 2013 by jgubow

Problem Description: Drive roller analog encoder homing (also known as “zero search”) failed. Corrective Action: Try the following: 1. Switch the power off from the back of the printer and disconnect the power cord. Reconnect the power cord and power … Continue reading →

Posted in Error Codes, HP DesignJet T1200 | Comments Off on Error Code 56:YZ