Author Archives: jgubow

Error Code 55:YZ

Posted on July 16, 2013 by jgubow

Problem Description: Problem with the Line Sensor. The printer has detected a failure to access the Line Sensor EEPROM. Corrective Action: Try the following: 1. Switch the power off from the back of the printer and disconnect the power cord. … Continue reading →

Posted in Error Codes, HP DesignJet T1200 | Comments Off on Error Code 55:YZ

Error Code 52:10

Posted on July 16, 2013 by jgubow

Problem Description: The printer has detected a failure in the Drop Detector. Corrective Action: Try the following: 1. Switch the power off from the back of the printer and disconnect the power cord. Reconnect the power cord and power on … Continue reading →

Posted in Error Codes, HP DesignJet T1200 | Comments Off on Error Code 52:10

Error Code 51:YZ

Posted on July 16, 2013 by jgubow

Problem Description: Window Sensor failure Corrective Action: Try the following: 1. Check that the Window Position Sensor cable is not damaged and is correctly connected to the Main PCA. 2. Perform the Sensors Test to troubleshoot the problem further. 3. … Continue reading →

Posted in Error Codes, HP DesignJet T1200 | Comments Off on Error Code 51:YZ

Error Code 48:YZ

Posted on July 16, 2013 by jgubow

Problem Description: PPS system failure Corrective Action: Try the following: 1. Switch the power off from the back of the printer and disconnect the power cord. Reconnect the power cord and power on the printer. 2. Check that the Pen … Continue reading →

Posted in Error Codes, HP DesignJet T1200 | Comments Off on Error Code 48:YZ

Error Code 47:YZ

Posted on July 16, 2013 by jgubow

Problem Description: Starwheels motor error Corrective Action: Try the following: 1. Switch the power off from the back of the printer and disconnect the power cord. Reconnect the power cord and power on the printer. 2. Open the Window and … Continue reading →

Posted in Error Codes, HP DesignJet T1200 | Comments Off on Error Code 47:YZ

Error Code 45.2:YZ

Posted on July 16, 2013 by jgubow

Problem Description: An error with the Rewinder 2 System (Lower Rewinder) has been detected Corrective Action: Try the following: 1. Switch the power off from the back of the printer and disconnect the power cord. Remove the paper from Roll … Continue reading →

Posted in Error Codes, HP DesignJet T1200 | Comments Off on Error Code 45.2:YZ

Error Code 45.1:YZ

Posted on July 16, 2013 by jgubow

Problem Description: An error with the Rewinder 1 System (Upper Rewinder) has been detected. Corrective Action: Try the following: 1. Switch the power off from the back of the printer and disconnect the power cord. Remove the paper from Roll … Continue reading →

Posted in Error Codes, HP DesignJet T1200 | Comments Off on Error Code 45.1:YZ

Error Code 42:YZ

Posted on July 16, 2013 by jgubow

Problem Description: Electrical problem (fault, current limit, overheating) in Scan-Axis Motor Corrective Action: Try the following: 1. Switch the power off from the back of the printer and disconnect the power cord. Reconnect the power cord and power on the … Continue reading →

Posted in Error Codes, HP DesignJet T1200 | Comments Off on Error Code 42:YZ

Error Code 41:YZ

Posted on July 16, 2013 by jgubow

Problem Description: Electrical fault or current limit in Media-Axis Motor Corrective Action: Try the following: 1. Switch the power off from the back of the printer and disconnect the power cord. Reconnect the power cord and power on the printer. … Continue reading →

Posted in Error Codes, HP DesignJet T1200 | Comments Off on Error Code 41:YZ

Error Code 39.2:01

Posted on July 16, 2013 by jgubow

Problem Description: Roll 2 switch failed (standby or resume). Roll 2 has been unloaded. Corrective Action: There is no corrective action. This system warning code only notifies the user that the roll has been unloaded because an unexpected error occurred … Continue reading →

Posted in Error Codes, HP DesignJet T1200 | Comments Off on Error Code 39.2:01