Error Code 02.2:YZ


Problem Description:

Problem with the Carriage PCA.

Corrective Action:

Try the following:

1. Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer.

2. Check that the Trailing Cable is not damaged.

3. Check that the Trailing Cable is correctly connected between the Main PCA and Carriage PCA.

4. If the System Error continues, replace the Trailing Cable.

5. If the System Error continues, replace the Carriage PCA.

6. If the System Error continues, replace the Main PCA.

7. If the System Error continues, replace the Formatter.

This entry was posted in Error Codes, HP DesignJet T1100. Bookmark the permalink.