Error Code 45:YZ


Problem Description:

An error with the Rewinder System has been detected.

Corrective Action:

Try the following:

1. Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer.

2. Check that the Rewinder cable is not damaged and is correctly connected to the PrintMech PCA.

3. Check that the Right Spindle Holder (rewinder included) is correctly attached to and aligned with the Right Cover.

4. Perform the Rewinder diagnostic test to troubleshoot the problem further.

5. Replace the Right Spindle Holder (rewinder included).

6. If the System Error continues, replace the PrintMech PCA.

Comments are closed.