Error Code 52:YZ


Problem Description:

The printer has detected a problem with the Drop Detector.

Corrective Action:

Try the following:

1. Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer.

2. Check that the Drop Detector cable is not damaged and is correctly connected to the PrintMech PCA.

3. Check that the Service Station cable is not damaged and is correctly connected to the PrintMech PCA.

4. Replace the Drop Detector.

5. Reset the Calibration Flag of the Drop Detector.

6. If the System Error continues, replace the PrintMech PCA.

7. If the System Error continues, replace the Formatter.

Comments are closed.