Author Archives: jgubow

Error Code 58:YZ

Posted on July 11, 2013 by jgubow

Problem Description: The Line Sensor of the printer is not functioning correctly. Either the Line Sensor shutter has failed to open, there is a failure to communicate with the Line Sensor, the Line Sensor is not calibrated correctly, or the … Continue reading →

Posted in Error Codes, HP DesignJet T1100 | Comments Off on Error Code 58:YZ

Error Code 56:YZ

Posted on July 11, 2013 by jgubow

Problem Description: Drive roller analog encoder sensor fail or calibration failed. Corrective Action: Try the following: 1. Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the … Continue reading →

Posted in Error Codes, HP DesignJet T1100 | Comments Off on Error Code 56:YZ

Error Code 55:YZ

Posted on July 11, 2013 by jgubow

Problem Description: Problem with the Line Sensor. The printer has detected a failure to access Line Sensor EEPROM). Corrective Action: Try the following: 1. Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect … Continue reading →

Posted in Error Codes, HP DesignJet T1100 | Comments Off on Error Code 55:YZ

Error Code 52:YZ

Posted on July 11, 2013 by jgubow

Problem Description: The printer has detected a problem with the Drop Detector. Corrective Action: Try the following: 1. Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On … Continue reading →

Posted in Error Codes, HP DesignJet T1100 | Comments Off on Error Code 52:YZ

Error Code 51:YZ

Posted on July 11, 2013 by jgubow

Problem Description: Window Sensor failure. Corrective Action: Try the following: 1. Check that the Window Position Sensor cable is not damaged and is correctly connected to the PrintMech PCA. 2. Perform the Sensors Test to troubleshoot the problem further. 3. … Continue reading →

Posted in Error Codes, HP DesignJet T1100 | Comments Off on Error Code 51:YZ

Error Code 48:YZ

Posted on July 11, 2013 by jgubow

Problem Description: PPS system failure. Corrective Action: Try the following: 1. Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. 2. Check that the Pen … Continue reading →

Posted in Error Codes, HP DesignJet T1100 | Comments Off on Error Code 48:YZ

Error Code 47:YZ

Posted on July 11, 2013 by jgubow

Problem Description: Star wheels motor error.. Corrective Action: Try the following: 1. Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. 2. Check that the … Continue reading →

Posted in Error Codes, HP DesignJet T1100 | Comments Off on Error Code 47:YZ

Error Code 45:YZ

Posted on July 11, 2013 by jgubow

Problem Description: An error with the Rewinder System has been detected. Corrective Action: Try the following: 1. Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the … Continue reading →

Posted in Error Codes, HP DesignJet T1100 | Comments Off on Error Code 45:YZ

Error Code 44:YZ

Posted on July 11, 2013 by jgubow

Problem Description: Fan Electrical fault, or not connected.. Corrective Action: Try the following: 1. Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. 2. Check … Continue reading →

Posted in Error Codes, HP DesignJet T1100 | Comments Off on Error Code 44:YZ

Error Code 42:YZ

Posted on July 11, 2013 by jgubow

Problem Description: Electrical fault or current limit in Scan-Axis Motor.. Corrective Action: Try the following: 1. Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. … Continue reading →

Posted in Error Codes, HP DesignJet T1100 | Comments Off on Error Code 42:YZ